header image access division link to home page hire information button
  • link to astley hire
  • link to training
  • link to tools
  • link to tools
  • link to heating
  • link to cooling
powered access range - MEWP hire, specifications comparison
manual access range, specification comparison

Rough Terrain Scissor Lift Genie GS-3268 RT Hire


Genie GS-3268 RT rough terrain scissor lift
Code: AH3HRT
Per day from* : £42.71 before discount
More price info below

If you have work to do and the ground is rough, uneven or soft and muddy the Genie GS-3268 RT is the "go anywhere" lift you need to hire for working up to 11.7m high.

This 20hp diesel powered lift, has built in 4WD traction control, all terrain foam filled tyres and a 19cm ground clearance to get you where you need to lift. It will handle 30% slopes in the lowered driving position and the leveling outriggers will set you up with a solid platform on un-level ground (6.6degrees front to back and 10.6 degrees side to side). The tilt level sensor will tell you if you are pushing it too far.

Most of the Astley Hire Scissor lifts are for use on flat, stable ground. The Genie RT is in the range to make sure we have got the machines for you when you need to go "off piste" to get the job done.


compare with other boom lift work platformsCompare the Toucan JLG 1230 ES with other vertical lifts available to hire

Genie GS-3268 work platform Applications and Benefits

  • Rough terrain scissor lift.
  • Diesel powered.
  • Independent 4 wheel drive system with traction control.
  • The ideal choice for rough sites where you need power to get to the work faster.
  • With 5.5 square metres of space for workers and tools using the platform's slide-out extension.
  • Not just for rough terrain, this is a machine for all terrain with high speed productivity on flat, made-up ground as well.
  • With a lift capacity of 454kg it has the power and strength to tackle heavy duty work.
  • Narrow enough at 1.73m to drive through double doors for indoor and outdoor projects.
  • Hydraulic outriggers for automatic leveling the platform on uneven ground before elevating the platform.

Genie GS-3268 RT mobile work platform Specifications

Working height (m) 11.75
Platform height (m) 9.75
Lift capacity - overall (kg) 454
Height - stowed (m) 1.83
Length - stowed (m) 2.67
Width (m) 1.73
Wheelbase (m) 1.85
Weight (kg) 3762
Power source Kubota 20hp diesel

Note: Specification table for guidance only, for definitive data refer to the manufacturers specification sheet.

Get a Quick Quote
with discounts applied

Genie GS-3268RT Hire prices / Cost

Please note: All prices are subject to VAT at the standard rate.

The Access Hire rate / price for the Genie GS-3268 RT will be subject to a competitive account discount. Read more about Trade Hire Rates, Prices & Cost.

Code 1 day 2 day 3 day Weekend Week
AH3HRT £166.75 £201.25 £230.00 £201.25 £299.00
* Note: " Per day from : £ " The hire rate quoted at the top of the page is the cost per day during a one week hire. The price you pay will be lower when your account discount has been applied, click for discount info.

guarantee and accreditations
haccp food and clean room
access guard hire without insurance

IPAF Training for Mobile Vertical lifts

Do you need training or a special qualification to hire and use a Genie GS-3268 RT. The short answer is no. The long answer is, in a work environment employers need to ensure that workers are properly trained and competent to use the equipment. The most widely accepted training and qualification is an IPAF PAL card (Powered Access License). With this operatives will be able to work on virtually any site. Read more about the IPAF category 3a training courses run by the Astley Hire dedicated training division.

link to Ipaf and Pasma training
"I can share this"
arrow back to top